Product ID:EXTERIOR ACRYLIC LATEX SEMI GLOSS COLOR 177
MSDS Date:03/16/1989
FSC:8010
NIIN:00N037413
MSDS Number: BQTWN

STILES PAINT MFG INC

3428 ENTERPRISE AVE
HAYWARD, CA 94545
US

Emergency Phone: 415-887-8880

Info Phone: 415-887-8868

Cage: 00L71

STILES PAINT MFG INC

HAYWARD, CA 94545 US

Telephone: 510-887-8868

Cage: 00L71

MERCURY COMPOUND

Fraction By Weight: <0.5%

OSHA PEL 0.01 MG/M3,S (HG)

ACGIH TLV: 0.01 MG/M3,S (HG)

EMULSION SOLUTION

Fraction By Weight: 50%

PROPIONIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: <5%

4 @ 20C.

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: <5%

ACGIH TLV: 10 PPM (MFR)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <5%

OSHA PEL 50 PPM,C

ACGIH TLV: 50 PPM VAP, MIST,C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

1,2-PROPANEDIOL;(PROPYLENE GLYCOL)

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: <5%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:DIZZINESS, BREATHING DIFFICULTY,
HEADACHES, AND LOSS OF COORDINATION. EYE:SEVERE EYE IRRITATION, AND
DERMATITIS. SKIN:CAN DRY AND DEFAT SKIN CAUSING CRACKS, IRRITATION
AND DERMATITIS. INGEST:CAN CAUSE GASTRO INTESTINAL IRRITATION,
VOMITING, NAUSEA AND DIARRHEA. NOTE:MERCURY COMPOUNDS APPEAR ON
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: THE NAVY LISTING OF
OCCUPATIONAL CHEMICAL REPRODUCTIVE HAZARDS. SEEK CONSULTATION FROM
APPROPRIATE HEALTH PROFESSIONALS CONCERNING THE LATEST HAZARD LIST
INFORMATION AND SAFE HANDLING AND USE RECOMMENDATIONS .
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS, NAUSEA, VOMITING.

First Aid:INHAL:MOVE TO FRESH AIR. IF BREATHING STOPS GIVE ARTIFICIAL
RESPIRATION AND GET MD. EYE:FLUSH WITH LARGE QUANTITIES OF WATER
FOR AT LEAST 15 MINUTES. SKIN:WASH THOROUGHLY WITH SOAP & WATER AND
GET MD. INGEST:DO NOT INDUCE VOMITING, CAN CAUSE CHEMICAL
PNEUMONITIS AND PULMONARY EDEMA. CALL MD IMMEDIATELY.

Flash Point:>200F,>93C
Lower Limits:2.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER SHOULD NOT BE USED EXCEPT AS FOG TO
KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HANDLE AS FLAMM LIQ. VAPS FORM EXPLO
MIXTURE BETWEEN UPPER & LOWER EXPLOSIVE LIMITS WHICH CAN BE IGNITED
BY MANY SOURCES SUCH AS PILOT LIGHTS, OPEN (SUPDAT)

Spill Release Procedures:ELIMINATE IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE SPILL AREA AND ADD ABSORBENT EARTH OR SAWDUST TO
SPILLED LIQUID. THOROUGHLY WET W/WATER AND MIX.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE NON SPARKING UTENSILS WHEN
HANDLING MATERIAL. AVOID HOT METAL SURFACES. USE ONLY IN COOL WELL
VENTILATED AREAS. KEEP CNTNRS CLSD WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM EXCESSIVE HEAT AND OPEN FLAMES.
SMOKING IN AREAS WHERE MATERIAL IS USED IS STRICTLY PROHIBITED.
SOME COLORS MAY CONTAIN LEAD PIGMENTS.

Respiratory Protection:ALL RESPS MUST BE NIOSH/MSHA APPROVED. WHEN
SPRAYING USE CARTRIDGE RESPIRATOR OR GAS MASK SUITABLE TO KEEP
AIRBORNE MISTS VAPOR CONCENTRATIONS BELOW TLV. WHEN USING IN POORLY
VENTILATED AREAS USE FRES H-AIR SUPPLYING RESPIRATOR OR SCBA.
Ventilation:GOOD MECH VENT/LOCAL EXHAUST SHOULD BE SUITABLE TO KEEP
VAPOR CONCENTRATIONS BELOW TLV. VENT EQUIP MUST BE EXPLO PROOF.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:IMPERMEABLE APRONS AND PROTECTIVE CLOTHING.
Work Hygienic Practices:EYE WASH AND SAFETY SHOWER.
Supplemental Safety and Health
EXPLO HAZ:FLAMES, ELECTRICAL MOTORS AND SWITCHES.

Vapor Pres:SEE ING
Vapor Density:LTR/AIR
Spec Gravity:1.21
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:59.15

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS OR OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERES, EXCESSIVE AGING.
Hazardous Decomposition Products:TYPICAL BY PRODUCTS OF COMBUSTION.

Waste Disposal Methods:COLLECT ABSORBENT/WATER/SPILLED MIXTURE INTO
METAL CONTAINERS & ADD ENOUGH WATER TO COVER. CONSULT LOCAL, STATE
& FEDERAL HAZARDOUS WASTE REGULATIONS BEFORE DISPOSING INTO
APPROVED HAZ WASTE LANDFILLS . DISP MUST BE I/A/W LOC, STATE & FED
REGS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.